Antistatic Dust Filter Bag

Send Inquiry
Antistatic Dust Filter Bag
Details
Our Antistatic Dust Filter Bag is sewn from polyester needlefelt with conductive filament yarn woven in parallel strips, made to diameters of 120–152 mm and lengths of 2,000–6,000 mm. It bleeds away triboelectric charge so combustible dust streams collect without a spark jumping across the fabric.
Category
Industrial Dust Collector
Share to
Description

Combustible organic dust charges the felt as particles slide past. Left to build up, that charge discharges as a spark that can ignite a dust cloud. Conductive monofilament runs through the felt at 5 cm spacing, then the cage bonds to an earthed housing so charge drains to ground. Each Antistatic Dust Filter Bag ships with measured surface resistance below 10^8 ohm and a note that cage, casing and strap form one conductor.

 

Product Parameters

 

Item

Specification

Media

Polyester needlefelt with conductive yarn strips

Surface resistance

≤ 10^8 Ω

Bag diameter

120, 130, 152 mm

Bag length

2,000–6,000 mm

Fabric weight

500–550 g/m²

Max working temperature

130 °C continuous

Air permeability

120–180 L/dm²/min

 

Product Advantages

 

Conductive strips discharge static continuously, without waiting for a spark

The felt keeps dust capture above 99.6% on particles larger than 1 μm

Bags fit standard cages with snap-band or flange mouths, no tube-sheet rework

This Antistatic Dust Filter Bag pairs with the venting and spark detectors on the housing

 

Main Applications

 

Coal bunkers, coal mills and pulverized coal conveying lines

Grain, flour and feed milling where organic dust clouds form

Woodworking, pellet presses and biomass fuel handling

Light-metal dust extraction in aluminum and magnesium shops

Carbon black, plastic powder and chemical powder transfer points

 

.jpg
.jpg

 

FAQ

Q: What surface resistance do you measure?

A: Every batch tests below 10^8 ohm, printed on the sheet. For stricter ATEX zones we tighten the yarn spacing to hold 10^6–10^9 ohm.

Q: Can it handle hot gas?

A: Standard polyester runs to 130 °C. Above that we switch the base fabric to aramid or PPS and keep the same conductive strips.

Q: Do I still need explosion vents?

A: Yes. Static control removes one ignition source; it does not replace venting or isolation. This Antistatic Dust Filter Bag works alongside those measures.

 

 

Hot Tags: antistatic dust filter bag, China antistatic dust filter bag manufacturers, suppliers, factory, fume dust extractor, Industrial Cartridge Dust Collectors, industrial dust, industrial dust extractor fan, industrial saw dust collection systems, vertical dust collector

Send Inquiry