Pressure drop climbs as the dust cake thickens. An open base web plus a tight, singed face stops particles near the skin, so the cake releases fully each pulse and resistance does not ratchet upward. The steady window lands near 1,000–1,200 Pa against the 1,500–2,000 Pa a standard felt sits at, and that gap feeds into the fan's kWh meter.
Product Parameters
|
Item |
Specification |
|
Construction |
Gradient needlefelt, singed face |
|
Bag size |
φ130 × 2,000 / 2,500 mm, custom on request |
|
Fabric weight |
500 g/m² |
|
Air permeability |
180–230 L/dm²/min |
|
Operating pressure drop |
1,000–1,200 Pa |
|
Air-to-cloth ratio |
1.2–1.8 m/min |
|
Outlet emission |
≤ 10 mg/Nm³ |
|
Continuous temperature |
130 °C (polyester) |
Product Advantages
The lower steady differential lets the ID fan run at reduced load, cutting kWh hourly
A released cake falls cleanly, lengthening the pulse interval and saving compressed air
The singed face resists blinding on fine hygroscopic dust
A Low Pressure Drop Filter Bag pays back through fan power before you count the longer cloth life
Our Services

We send sample bags for a trial cell, measure the differential before and after, and tune permeability to your dust. A Low Pressure Drop Filter Bag for the test cell is chosen from media matching your particle size. Custom diameters and mouth fittings quote against a drawing.
FAQ
Q: Does low pressure drop push emissions up?
A: The singed surface holds particles on the outside, so outlet dust stays near 10 mg/Nm³ even at the lower resistance.
Q: Which dusts suit it best?
A: Non-fibrous, free-flowing dust such as cement, lime, mineral powder and food powders. Sticky or oily dust needs a different media finish.
Q: How do I prove the fan is saving power?
A: Record fan amp draw across one filter change. This Low Pressure Drop Filter Bag typically cuts differential by 300–500 Pa versus a standard felt, and the fan current follows.
Hot Tags: low pressure drop filter bag, China low pressure drop filter bag manufacturers, suppliers, factory, esp boiler, esp working in thermal power plant, industrial baghouse, industrial dust cleaner, steel dust collector, Steel Production Industrial Dust Collector
