PPS Dust Filter Bag

Send Inquiry
PPS Dust Filter Bag
Details
Our PPS Dust Filter Bag is needlefelt woven from polyphenylene sulfide staple fiber, sewn to diameters of 130–160 mm and lengths up to 8,000 mm for flue-gas service. It runs continuously at 160–190 °C and stands up to the sulfurous, moist gas behind a coal-fired boiler.
Category
Industrial Dust Collector
Share to
Description

Coal flue gas carries SO2, SO3 and fly ash at dew points where polyester rots within months. PPS keeps its strength in that acid, wet stream at 160–190 °C, and tolerates a balanced boiler's oxygen (5–8%) over a 36–60 month cloth life. We singe the face and offer PTFE bonding for heavy ash. Above 150 °C with excess air past 12% O2, the fiber oxidizes faster, so we check air infiltration first.

 

Product Parameters

 

Item

Specification

Fiber

Polyphenylene sulfide (PPS)

Continuous temperature

160–190 °C

Surge temperature

200 °C, short term

Bag size

φ130–160 × up to 8,000 mm

Fabric weight

550 g/m²

Acid resistance

H2SO4, HCl, SO2 resistant

Outlet emission

≤ 10 mg/Nm³

Expected cloth life

36–60 months

 

Product Advantages

 

Resists acid and hydrolysis that attacks polyester in coal gas

Handles the moist, slightly sticky ash after desulfurization

Sealed seams plus a PTFE-bonded face cut fine ash bleed

The PPS Dust Filter Bag covers the coal-boiler window to 190 °C at a lower cloth cost than full PTFE media

 

Main Applications

 

.jpg

Coal-fired boiler and thermal power plant baghouses

Circulating fluidized-bed boilers and biomass boilers

Waste incineration and municipal solid-waste gas trains

Lime-gypsum desulfurization (FGD) downstream service

A PPS Dust Filter Bag suits acid, wet streams; dry, purely abrasive dust calls for a different media

FAQ

Q: How hot can it really run?

A: Continuous 160–190 °C, with short surges to 200 °C. Run hotter and the fiber embrittles and loses tensile strength.

Q: Does it work after a wet FGD scrubber?

A: That is its home territory - moist, sulfurous gas. We add PTFE bonding when the ash turns sticky.

Q: Why does a PPS sleeve sometimes fail early?

A: Usually excess oxygen from leaking ducts or poor seal air. This PPS Dust Filter Bag performs best once you send us a gas analysis first.

 

 

 

Hot Tags: pps dust filter bag, China pps dust filter bag manufacturers, suppliers, factory, electrostatic precipitators for power plants, industrial dust cleaner, industrial dust collector filters, Industrial Electrostatic Precipitator, Metal Dust Collection Systems for Machine Shops, warehouse dust extraction

Send Inquiry