Most cloth problems start in the media choice, not in the collector. The wrong media shows up early as a torn sleeve, a rising differential or a plume at the stack. Match the fiber to the gas before you quote a baghouse.
PPS handles coal flue gas. It runs continuously at 160–190 °C and shrugs off the sulfurous, moist stream behind a coal or CFB boiler, with a cloth life of 36–60 months once oxygen stays near 5–8%. It is the usual pick for power and biomass boilers, and it costs less than full PTFE media.
PTFE goes hotter and harsher. A membrane bag runs at 240–260 °C, resists strong acids and solvents, and holds the outlet below 5 mg/Nm³ on steel, incinerator and chemical gas. It costs more, but it is the right call when PPS would oxidize or rot under continuous high heat.
Antistatic matters for combustible dust. Coal powder, flour, wood, plastic and light-metal dust charge the felt; conductive yarn keeps the surface resistance under 10^8 ohm and the charge drains to an earthed cage. It removes one ignition source, not the need for venting.
Tell us the gas temperature, chemistry, moisture and particle size, and we point to one media instead of selling all three.