Steel Mill Baghouse Runs 260 °C Converter Gas On PTFE Membrane Bags

Nov 03, 2026

Leave a message

A steel shop raises dust at the converter, the refining furnace and the blast furnace, and each spot carries its own gas temperature and dust load. For the high-temperature points we build a baghouse with PTFE membrane bags that handle 260 °C continuous gas at collection efficiency of at least 99.9%.

The membrane catches fine converter dust on its surface, so the outlet stays below 5 mg/Nm³ and the cake releases on the first pulse. A spark catcher sits in front of the bags, and a differential-pressure monitor watches each chamber, locating a leaking bag early before it shows on the stack. The modular frame lets us size cells to the converter, refining or blast-furnace area separately, so one oversized housing is replaced by cells matched to each source.

Where the gas is cooler and coarser, an electrostatic precipitator takes the bulk load and a polishing baghouse handles the finest fraction. Explosive dust zones get earthed cages, antistatic media and venting. Field feedback from such modular builds puts combined energy use down by around 22% against a single oversized system. Each cell is isolated for online cleaning, so the line keeps running while one chamber is off, and the stack reading stays flatter through the campaign.

Send Inquiry